• 会员登入
2 Year Warranty

PCI-1274-12AE Basic motion Controller with 12LTC/12CMP

  • 编码器输入规格为4xAB模式 10MHz,CW/CCW模式2.5 MHz
  • 脉冲输出1的MPPs,可通过跳线设置为差分或单端输入方式
  • 支持2轴直线插补
  • 支持运动叠加功能
  • 支持T / S曲线和可编程的加/减速率
  • 支持16种会HOME模式
  • 支持12-CH通道比较触发功能
  • 下单前货期问题请与在线客服确认

加入购物车 立即购买

详细规格

General

  • Humidity (Storage) 5~95% RH (non-condensing)
  • Humidity (Operating) 5~95% RH (non-condensing)
  • Connectors 1 x 100-pin SCSI female connector

Counter/Encoder Input

  • Counting Range 32-bit

Encoder Type and Interface

  • Input Type Quadrature (A/B phase) or up/down
  • Input Range 0~1 VDC for low; 3.5~5 VDC for high
  • Max. Input Frequency 10 MHz under x4 A/B phase mode
  • Counts per Enc. Cycle x1, x2, x4 (A/B phase only)

Pulse Type Motion Control

  • Motor Driver Support Pulse-type servo/stepping
  • Interpolation 2-axis linear interpolation
  • Max. Output Speed 1 Mbps
  • Step Count Range ±2, 147, 483, 646
  • Pulse Output Type Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
  • Velocity Profiles T-Curve, S-Curve

Frequency

  • Signal Input Logic level 1: 10~30 VDC Logic level 0: 0~3 VDC

Local I/O

  • General Input Signal Input voltage: 24 VDC Max. Input delay: 100 us Max. (isolation delay) Signal: EMG (emergency stop) ORG, LMT+, LMT- INPOS (in position signal) LTC (counter latch) RDY (servo ready) ALARM (servo alarm)
  • General Output Signal Output voltage: Open collect 24 VDC Max Output delay: 100 us Max. (isolation delay) Sink current: 100 mA per channel Signal: CMP (position compare in range output) SVON (servo on) RALM (reset driver alarm) ERC (counter clear signal)
x
联系我们

400-810-0345

上午8:30 至 下午5:30

Contact Advantech